Customer Guide: Patuoxun Wireless ELM327 WIFI OBD 2 Car Diagnostic Reader Scanner for iPhone 4S 4G iPad 2

Price : CHECK SPECIAL OFF*E**RS!!!

Patuoxun Wireless ELM327 WIFI OBD 2 Car Diagnostic Reader Scanner for iPhone 4S 4G iPad 2

Features

• SSID: OBDDevice / CLKDevices. IP/Port: 192.168.0.10:35000
• Antenna: Internal. Power Consumption: 0.75 Watts. Wifi Standard: 802.11a/b/g.
• Operating Temperature: -15 to 100 Celsius. Size: 15x13x4cm. Weight: 5.50oz
• Compatible With: SAE J1850 PWM (41.6 kbaud), SAE J1850 VPW (10.4 kbaud), ISO 9141-2 (5 baud init, 10.4 kbaud), ISO 14230-4 KWP (5 baud init, 10.4 kbaud), ISO 14230-4 KWP (fast init, 10.4 kbaud), ISO 15765-4 CAN (11 bit ID, 500 kbaud), ISO 15765-4 CAN (29 bit ID, 500 kbaud), ISO 15765-4 CAN (11 bit ID, 250 kbaud), ISO 15765-4 CAN (29 bit ID, 250 kbaud)
• What is included: 1 x ELM327 WiFi Wireless OBD2 Interface, 1 x Software CD.

Product Description: Patuoxun Wireless ELM327 WIFI OBD 2 Car Diagnostic Reader Scanner for iPhone 4S 4G iPad 2

There are tons of software available, which are fully compatible with WIFI OBD interface, such as engine running parameters monitoring, DTC reading and clearing, MPG meter, etc. By using the device you can monitor all these parameters from your PC, Mac, iPhone, Ipad etc with a compatible software or you can even write your own software on a specified hardware platform if need, because the AT commands are fully documented and very well explained. With proper software installed in the host device, you may have following parameters read out from your vehicle: Vehicle Speedobd2 wifi dongle
RPM
Fuel Consumption
Engine Coolant Temp
Fuel Pressure
Calculated Engine Load
Throttle Position
Intake Manifold Pressure
Air